Soundproofing plate in flexible self-adhesive anti-noise Vibrogum (21110)
  • Send to a friend

    * Required fields

    to cancel

No reward points for this product.
See your loyalty points

Bitumen soundproofing plate, flexible self-adhesive noise-canceling Vibrogum (20x50cm)

Reference: DA00043

Self-adhesive black flexible Vibrogum bitumen soundproofing plate 20x50cm

Find out more
8,79 €8.79

In stock

100% secure payments
  • Satisfied or refunded Satisfied or refunded
  • Delivery 24-48h * Delivery 24-48h * from € 3.90
  • 100% secure payment 100% secure payment
Bitumen soundproofing plate, flexible self-adhesive noise-canceling Vibrogum (20x50cm)
8,79 €
8.79
In stock
Description

Help in choosing soundproofing:

In order to help you choose the most suitable soundproofing (use, location, position, etc.) we provide you with a downloadable PDF document to help you choose.

How to choose your soundproofing?

Self-adhesive black flexible acoustic bitumen soundproofing plate 100x50cm:

  • Very flexible adhesive bituminous plate
  • Retaillable
  • Sticks to the inside sheets (doors, trunk bottoms, floors, hoods, fenders, etc.)
  • Removes vibrations and resonance
  • Thickness 1.5mm
  • 4Kg / m²
  • Product not classified for fire
  • Sold in plate of 20 x50cm

Tips:

  • The support must be completely degreased - In order to obtain a satisfactory result, we recommend that you clean the support and check that there is no fatty substance
  • The support must be at a temperature of 15 ° Minimum - We advise you to bring the 2 supports to temperature so that the glue can polymerize. to do this, use a heat gun or a hair dryer, especially in winter
  • If you need to shape it around concave or convex pieces, you can make diamond point cutouts
  • If you fear that water will seep between the sheet metal and the vibrogum, we recommend that you make a joint on the periphery
  • WARNING! this bituminous product is fragile it becomes rigid and brittle in cold weather
  • We cannot be held responsible for the breakage of this product during transport
  • If plates are damaged during transport, you can use them by heating them before installation

more products here

Technical service notice

  • The support must be completely degreased - In order to obtain a satisfactory result, we advise you to clean the support and to check that there is no fatty substance.
  • The support must be at a temperature of 15 ° Minimum - We advise you to bring the 2 supports to temperature so that the glue can polymerize. to do this, use a heat gun or a hair dryer, especially in winter.
  • If you need to shape it around concave or convex pieces, you can make diamond point cutouts.
  • If you fear that water will seep between the sheet and the vibrogum, we advise you to make a joint on the periphery with the mastic below in products partners.

Other products in the same category

Trusted Shops Reviews