Suspension Shock Spring Compressor - ToolAtelier

Reference: DA12254

A shock absorber spring compressor for mounting and removing shock absorber springs using a simple ratchet.

Find out more
17.75
17,75 €

In stock

  • Send to a friend

    * Required fields

    to cancel

By purchasing this product you can earn up to 1 loyalty point that you can convert into a 0,20 €.
See your loyalty points

100% secure payments
  • Satisfied or refunded Satisfied or refunded
  • Delivery 24-48h * Delivery 24-48h * from € 3.90
  • 100% secure payment 100% secure payment
Suspension Shock Spring Compressor - ToolAtelier
17,75 €
17.75
In stock
Description

Suspension shock absorber spring compressor - ToolAtelier®

This ToolAtelier shock spring compressor allows the shock absorber springs to be mounted and removed with a simple ratchet wrench.

• 2 threaded rods
• 2 double compression claws

The gap between the hooks must be at most 235 mm.
The pressure exerted must be a maximum of 1.1 t.
These shock absorber claws are sold by 2


Using a shock absorber spring compressor:
1- Position the springs face to face on the spring
2- Lubricate the front screws to start
3- Turn the 2 screws of the tool simultaneously
4- With the spring compressed, remove the bearing and the cup
5- Once the spring has been removed, the shock absorber can be replaced

Video:

Technical service notice

We advise you to lubricate the 2 threaded rods before any use.
Be careful not to use a motorized tool for this intervention!

Trusted Shops Reviews